| 7201.10.01-00 | Non-alloy pig iron containing by weight 0.5% or less of phosphorus | 35% |
| 7201.50.02-00 | Alloy pig iron; spiegeleisen | 35% |
| 7202.11.01-00 | Ferro-alloys: containing by weight more than 2% of carbon | 35% |
| 7202.19.99-01 | Ferro-alloys (other) (subheading 7202.19) | 35% |
| 7202.29.99-00 | Ferro-alloys (other) (subheading 7202.29) | 35% |
| 7202.30.01-00 | Ferro-alloys: ferro-silico-manganese | 35% |
| 7202.70.01-00 | Ferro-alloys: ferro-molybdenum | 30% |
| 7202.92.02-00 | Ferro-alloys: ferro-vanadium | 35% |
| 7202.99.99-01 | Ferro-alloys (other) (subheading 7202.99) | 35% |
| 7203.10.01-00 | Ferrous products obtained by direct reduction of iron ore | 35% |
| 7204.10.01-00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel: waste and scrap of cast iron | 35% |
| 7204.29.99-00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel (other) (subheading 7204.29) | 35% |
| 7204.30.01-00 | Waste and scrap of tinned iron or steel | 35% |
| 7204.41.01-00 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | 35% |
| 7204.49.99-00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel (other) (subheading 7204.49) | 35% |
| 7204.50.01-00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel: remelting scrap ingots | 35% |
| 7205.10.01-00 | Granules and powders of pig iron, spiegeleisen, iron or steel: grit and shot | 35% |
| 7205.21.01-00 | Granules and powders of pig iron, spiegeleisen, iron or steel: of alloy steel | 35% |
| 7205.29.99-00 | Granules and powders of pig iron, spiegeleisen, iron or steel (other) | 35% |
| 7206.10.01-00 | Iron and non-alloy steel in ingots or other primary forms, excluding iron of heading 72.03: ingots | 35% |
| 7206.90.99-00 | Iron and non-alloy steel in ingots or other primary forms, excluding iron of heading 72.03 (other) | 35% |
| 7208.10.03-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: in coils, not further worked than hot-rolled, with patterns in relief | 35% |
| 7208.25.02-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more | 35% |
| 7208.26.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7208.26) | 35% |
| 7208.27.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of less than 3 mm (subheading 7208.27) | 35% |
| 7208.36.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness exceeding 10 mm (subheading 7208.36) | 35% |
| 7208.37.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more but not exceeding 10 mm (subheading 7208.37) | 35% |
| 7208.38.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7208.38) | 35% |
| 7208.39.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of less than 3 mm (subheading 7208.39) | 35% |
| 7208.40.02-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: not in coils, not further worked than hot-rolled, with patterns in relief | 35% |
| 7208.51.04-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness exceeding 10 mm (subheading 7208.51) | 35% |
| 7208.52.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more but not exceeding 10 mm (subheading 7208.52) | 35% |
| 7208.53.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7208.53) | 35% |
| 7208.54.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of less than 3 mm (subheading 7208.54) | 35% |
| 7208.90.99-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more (other) (subheading 7208.90) | 35% |
| 7209.15.04-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 3 mm or more (subheading 7209.15) | 35% |
| 7209.16.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness exceeding 1 mm but less than 3 mm (subheading 7209.16) | 35% |
| 7209.17.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 0.5 mm or more but not exceeding 1 mm (subheading 7209.17) | 35% |
| 7209.18.01-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of less than 0.5 mm (subheading 7209.18) | 35% |
| 7209.25.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 3 mm or more (subheading 7209.25) | 35% |
| 7209.26.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness exceeding 1 mm but less than 3 mm (subheading 7209.26) | 35% |
| 7209.27.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 0.5 mm or more but not exceeding 1 mm (subheading 7209.27) | 50% |
| 7209.28.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of less than 0.5 mm (subheading 7209.28) | 35% |
| 7209.90.99-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more (other) (subheading 7209.90) | 35% |
| 7210.11.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: of a thickness of 0.5 mm or more | 25% |
| 7210.20.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: lead-coated, including terne-plate | 35% |
| 7210.30.02-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: electrolytically zinc-coated | 35% |
| 7210.41.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: sheets zinc-coated on both sides | 35% |
| 7210.41.99-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: otherwise zinc-coated: corrugated (other) | 35% |
| 7210.49.99-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more (other) (subheading 7210.49) | 35% |
| 7210.61.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: plated or coated with aluminium-zinc alloys | 35% |
| 7210.69.99-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more (other) (subheading 7210.69) | 35% |
| 7210.70.02-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more: painted, varnished or coated with plastics | 25% |
| 7210.90.99-01 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more (other) (subheading 7210.90) | 35% |
| 7211.13.01-00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of 4 mm or more, not in coils and without patterns in relief | 35% |
| 7211.14.91-01 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated (other) (subheading 7211.14) | 35% |
| 7211.19.99-01 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated (other) (subheading 7211.19) | 35% |
| 7211.23.03-01 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: containing by weight less than 0.25% of carbon | 35% |
| 7211.29.99-01 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated (other) (subheading 7211.29) | 35% |
| 7211.90.99-00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated (other) (subheading 7211.90) | 35% |
| 7212.10.03-01 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: tinned | 25% |
| 7212.20.03-01 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: electrolytically zinc-coated | 35% |
| 7212.30.03-01 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: otherwise zinc-coated | 35% |
| 7212.40.04-01 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: painted, varnished or coated with plastics | 25% |
| 7212.50.01-00 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: otherwise plated or coated | 35% |
| 7212.60.04-01 | Flat-rolled products of non-alloy iron or steel, of a width of less than 600 mm, clad, plated or coated: plated | 25% |
| 7213.10.01-00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: with indentations, ribs, grooves or other deformations produced during the rolling process | 35% |
| 7213.20.91-00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (other) (subheading 7213.20) | 35% |
| 7213.91.03-01 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: of circular cross-section, of a diameter of less than 14 mm | 50% |
| 7213.99.99-01 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (other) (subheading 7213.99) | 50% |
| 7214.10.01-00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded: forged | 35% |
| 7214.20.01-00 | Deformed bars or rods for concrete reinforcement | 35% |
| 7214.20.99-00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded: with indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling (other) | 35% |
| 7214.30.91-00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded (other) (subheading 7214.30) | 35% |
| 7214.91.03-01 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded: of rectangular cross-section | 35% |
| 7214.99.99-01 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded (other) (subheading 7214.99) | 35% |
| 7215.10.01-00 | Other bars and rods of iron or non-alloy steel: of free-cutting steel, not further worked than cold-formed or cold-finished | 35% |
| 7215.50.91-01 | Other bars and rods of iron or non-alloy steel (other) (subheading 7215.50) | 35% |
| 7215.90.99-01 | Other bars and rods of iron or non-alloy steel (other) (subheading 7215.90) | 35% |
| 7216.10.01-01 | U, I or H sections, not further worked than hot-rolled or hot-extruded, of a height of less than 80 mm | 35% |
| 7216.21.01-01 | Angles, shapes and sections of iron or non-alloy steel: l sections | 35% |
| 7216.22.01-00 | Angles, shapes and sections of iron or non-alloy steel: t sections | 35% |
| 7216.31.03-01 | Angles, shapes and sections of iron or non-alloy steel: u sections | 35% |
| 7216.32.99-01 | Angles, shapes and sections of iron or non-alloy steel: i sections (other) | 35% |
| 7216.33.01-01 | H sections, excluding tariff code 7216.33.02 | 35% |
| 7216.40.01-01 | L or T sections, not further worked than hot-rolled or hot-extruded, of a height of 80 mm or more | 35% |
| 7216.50.99-00 | Angles, shapes and sections of iron or non-alloy steel (other) (subheading 7216.50) | 35% |
| 7216.61.01-00 | H, I, L, T, U and Z sections, of a thickness not exceeding 23 cm, excluding tariff code 7216.61.02 | 25% |
| 7216.61.02-00 | Angles, shapes and sections of iron or non-alloy steel: u and I sections, of a height of 13 cm or more but not exceeding 20 cm | 35% |
| 7216.61.99-00 | Angles, shapes and sections of iron or non-alloy steel: angles, shapes and sections, not further worked than cold-formed or cold-finished: obtained from flat-rolled products (other) | 35% |
| 7216.69.99-01 | Angles, shapes and sections of iron or non-alloy steel (other) (subheading 7216.69) | 35% |
| 7216.91.01-00 | Angles, shapes and sections of iron or non-alloy steel: cold-formed or cold-finished from flat-rolled products | 35% |
| 7216.99.99-00 | Angles, shapes and sections of iron or non-alloy steel (other) (subheading 7216.99) | 35% |
| 7217.10.02-01 | Wire of iron or non-alloy steel: uncoated, whether or not polished | 35% |
| 7217.20.02-01 | Wire of iron or non-alloy steel: zinc-coated | 35% |
| 7217.30.02-01 | Wire of iron or non-alloy steel: plated or coated with other base metals | 35% |
| 7217.90.99-01 | Wire of iron or non-alloy steel (other) | 35% |
| 7218.10.01-00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel: ingots or other primary forms | 35% |
| 7218.91.01-00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel: of rectangular cross-section | 35% |
| 7218.99.99-00 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel (other) | 35% |
| 7219.11.01-00 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness exceeding 10 mm (subheading 7219.11) | 20% |
| 7219.12.02-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more but not exceeding 10 mm (subheading 7219.12) | 20% |
| 7219.13.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7219.13) | 50% |
| 7219.14.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of less than 3 mm (subheading 7219.14) | 35% |
| 7219.21.01-00 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness exceeding 10 mm (subheading 7219.21) | 20% |
| 7219.22.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more but not exceeding 10 mm (subheading 7219.22) | 20% |
| 7219.23.01-00 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7219.23) | 35% |
| 7219.24.01-00 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of less than 3 mm (subheading 7219.24) | 35% |
| 7219.31.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 4.75 mm or more | 35% |
| 7219.32.02-02 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 3 mm or more but less than 4.75 mm (subheading 7219.32) | 25% |
| 7219.33.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness exceeding 1 mm but less than 3 mm | 25% |
| 7219.34.01-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of 0.5 mm or more but not exceeding 1 mm | 25% |
| 7219.35.02-01 | Flat-rolled products of stainless steel, of a width of 600 mm or more: of a thickness of less than 0.5 mm | 25% |
| 7219.90.99-00 | Flat-rolled products of stainless steel, of a width of 600 mm or more (other) | 35% |
| 7220.11.01-00 | Flat-rolled products of stainless steel, of a width of less than 600 mm: of a thickness of 4.75 mm or more | 20% |
| 7220.12.01-00 | Flat-rolled products of stainless steel, of a width of less than 600 mm: of a thickness of less than 4.75 mm | 20% |
| 7220.20.03-01 | Flat-rolled products of stainless steel, of a width of less than 600 mm: not further worked than cold-rolled | 20% |
| 7220.90.99-00 | Flat-rolled products of stainless steel, of a width of less than 600 mm (other) | 35% |
| 7221.00.01-01 | Stainless steel wire rod | 35% |
| 7222.11.02-01 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: of circular cross-section | 35% |
| 7222.19.99-00 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel (other) (subheading 7222.19) | 35% |
| 7222.20.01-00 | Bars not further worked than cold-formed or cold-finished | 35% |
| 7222.30.91-01 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel (other) (subheading 7222.30) | 35% |
| 7222.40.01-01 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: profiles | 35% |
| 7223.00.02-01 | Stainless steel wire | 35% |
| 7224.10.06-01 | Other alloy steel in ingots or other primary forms: ingots or other primary forms | 35% |
| 7225.19.99-00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more (other) (subheading 7225.19) | 35% |
| 7225.30.91-01 | Flat-rolled products of other alloy steel, of a width of 600 mm or more (other) (subheading 7225.30) | 35% |
| 7225.40.91-01 | Flat-rolled products of other alloy steel, of a width of 600 mm or more (other) (subheading 7225.40) | 35% |
| 7225.50.91-01 | Flat-rolled products of other alloy steel, of a width of 600 mm or more (other) (subheading 7225.50) | 35% |
| 7225.91.01-00 | Flat-rolled products of other alloy steel, of a width of 600 mm or more: electrolytically zinc-coated | 35% |
| 7225.92.01-01 | Flat-rolled products of other alloy steel, of a width of 600 mm or more: otherwise zinc-coated | 35% |
| 7225.99.99-01 | Flat-rolled products of other alloy steel, of a width of 600 mm or more (other) (subheading 7225.99) | 35% |
| 7226.11.01-00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: grain-oriented | 35% |
| 7226.19.99-00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm (other) (subheading 7226.19) | 35% |
| 7226.20.01-00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: of high speed steel | Exempt |
| 7226.91.07-01 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: not further worked than hot-rolled | 35% |
| 7226.92.06-01 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: not further worked than cold-rolled | 35% |
| 7226.99.99-01 | Flat-rolled products of other alloy steel, of a width of less than 600 mm (other) (subheading 7226.99) | 35% |
| 7227.10.01-00 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: of high speed steel | 35% |
| 7227.20.01-01 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: of silico-manganese steel | 35% |
| 7227.90.99-01 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel (other) | 35% |
| 7228.10.02-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: bars of high speed steel | 35% |
| 7228.20.02-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: bars of silico-manganese steel | 35% |
| 7228.30.01-00 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: of tool-grade steel | 35% |
| 7228.30.99-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel (other) (subheading 7228.30) | 35% |
| 7228.40.91-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel (other) (subheading 7228.40) | 35% |
| 7228.50.91-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel (other) (subheading 7228.50) | 35% |
| 7228.60.91-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel (other) (subheading 7228.60) | 35% |
| 7228.70.01-01 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: profiles | 35% |
| 7228.80.01-00 | Other bars and rods of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: hollow drill bars | 35% |
| 7229.20.01-01 | Wire of other alloy steel: of silico-manganese steel | 35% |
| 7229.90.99-01 | Wire of other alloy steel (other) | 35% |